Allrise 3D Printing LED Moon Lamp Night Light, Dimmable Touch Control Brightness with USB Charging, Rechargeable Luna Night Light with Wooden Stand, Home Decorative Lights (7.1Inch) Review

Allrise 3D Printing LED Moon Lamp Night Light, Dimmable Touch Control Brightness with USB Charging, Rechargeable Luna Night Light with Wooden Stand, Home Decorative Lights (7.1Inch)

  • ✿If you love the space or have a child that does but is afraid of the dark, then the Moonlight night light would be the perfect addition to your home.
  • ✿This realistic looking night light has been made to look like the moon and has craters and pockmarks along the surface to mimic the moon’s surface.
  • ✿Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow; Long press the metal ring to adjust the brightness, and it has the brightness memory function.
  • ✿Safe and Environmentally Friendly: PLA material extracted from corn stalks, hard and smooth, non-toxic, odorless.You can hold it on your hand or put anywhere you like with the wood holder
  • ✿Long Using Time: 240mAh built-in battery, after the full charge, the lamp can be used 8-30 hours, a full charge takes about 6-8 hours

See more product details

How to Use:
1. Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow; Long press the metal ring to adjust the brightness, and it has the brightness memory function.
3. If your hand is too dry or the temperature is too low, the light may not respond.
4. The white light will not shine when power is low.
5. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during the charging.
6. The red light will automatically turn off when fully charged.

Features:
It brings you mystery and romance,
this night light is just what you need for an out of this world lighting experience.
3D Printing Technology: Print layer by layer, restore the real appearance of the moon Charging Port and Switch Integration: Simple, beautiful and practical, easy to operate.

Specifications:
Material: PLA
Wattage: 0.5 W
Light Color: Yellow, White
Brightness: stepless adjustment
Color Temperature: 3000K/6000K
Bulb: 1pcs white LED light and 1pcs yellow LED light
Battery Capacity: 1 x 240mAh Li-po Battery ( Built-In )
Charging Time: 6-8 H
Working Time: 8-30 H (Depends On Brightness )
Power supply: USB DC 5V
Diameter: 8cm/3.15″
Quantity: 1 Set

Note:
Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!

Package Contents:
1 x Moon Light
1 x USB Charging Cable
1 x Wood Scaffold